Adding the portal URL on a MAG device is one of the most important setup steps. If it is entered in the wrong field or saved incorrectly, the portal may never load. This guide explains exactly where to put it and what to check after saving.
Where to enter the portal URL
- Open the settings menu on the MAG device.
- Go to the server or portal configuration screen.
- Locate the field where the portal URL should be entered.
How to save it correctly
- Type or paste the portal URL exactly as received.
- Avoid spaces or extra symbols.
- Save the settings before leaving the page.
- Restart the portal after saving.
What to verify next
- Re-open the settings and confirm the URL is still there.
- Make sure the internet connection is active.
- Check that the correct MAC address was used during activation.
Best next action
- If you still need access details, use the free trial page.
- If your device is ready, continue to the plans section.
- If you want manual help, use WhatsApp support.
Ready to Continue?
Start with a free test, move to a plan, or get direct MAG help.
Final Tip
When you set up a MAG device, accuracy matters more than speed. Check the MAC address, enter the portal URL carefully, save the settings, and restart the portal in that order. That simple sequence solves most first-time setup problems.